Echo CS-8000P chain size
The chain for your Echo CS-8000P
Which bar is on your saw?
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 70
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 81
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 93
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 105
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 116
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Echo genuine part numbers
If you prefer the maker's own parts, these are the numbers to ask for at a dealer.
| Bar | Chain part no. | Bar part no. | Pitch / gauge | Drive links |
|---|---|---|---|---|
| 20" | 727070 | 200387001 | 3/8" / .050" | 70 |
| 24" | 727081 | 240388010 | 3/8" / .050" | 81 |
| 27" | 727093 | 270389301 | 3/8" / .050" | 93 |
| 32" | 7270105 | 320380501 | 3/8" / .050" | 105 |
| 36" | 7270116 | 360381601 | 3/8" / .050" | 116 |
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does an Echo CS-8000P take?
The Echo CS-8000P takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 20" bar 70, 24" bar 81, 27" bar 93, 32" bar 105, 36" bar 116.
How many drive links is an Echo CS-8000P chain?
It depends on the bar: 70 on a 20" bar, 81 on a 24" bar, 93 on a 27" bar, 105 on a 32" bar, 116 on a 36" bar. The bar length is usually printed near the mount.
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.