Husqvarna 130 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your Husqvarna 130

Which bar is on your saw?

Which chain is on it now?

Which chain is on it now?

14" bar

Pitch
3/8"
Gauge
.050"
Drive links
50

14" bar

Pitch
3/8"
Gauge
.050"
Drive links
52

16" bar

Pitch
3/8"
Gauge
.050"
Drive links
55

16" bar

Pitch
3/8"
Gauge
.050"
Drive links
56

18" bar

Pitch
3/8"
Gauge
.050"
Drive links
62

Buy this chain

Ad

3/8 pitch, .050 gauge, 50 drive links

AmazonNo exact listing found. Search for 3/8 pitch .050 gauge 50 drive links chainsaw chainSearch on AmazoneBayNo exact listing found. Search for 3/8 pitch .050 gauge 50 drive links chainsaw chainSearch on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the Husqvarna 130
Chain for each bar length
BarPitchGaugeDrive links
14"3/8".050"50
14"3/8".050"52
16"3/8".050"55
16"3/8".050"56
18"3/8".050"62

The Husqvarna 130 takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 14" bar 50, 14" bar 52, 16" bar 55, 16" bar 56, 18" bar 62.

Husqvarna genuine part numbers

If you prefer the maker's own parts, these are the numbers to ask for at a dealer.

Husqvarna bar and chain part numbers
BarChain part no.Bar part no.Pitch / gaugeDrive links
14"585422150 X-CUT® S93G5960097523/8" mini / .050"50
14"585422152, 597469501, 597469552 X-CUT® S93G5960097523/8" mini / .050"52
16"585422155 X-CUT® S93G596009756, 5975332563/8" mini / .050"55
16"585422156, 597469556 X-CUT® S93G596009756, 5975332563/8" mini / .050"56
18"585422162, 597469562 X-CUT® S93G5975332623/8" mini / .050"62

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Husqvarna 130 take?

The Husqvarna 130 takes 3/8" pitch, .050" gauge chain. Drive links by bar length: 14" bar 50, 14" bar 52, 16" bar 55, 16" bar 56, 18" bar 62.

How many drive links is a Husqvarna 130 chain?

It depends on the bar: 50 on a 14" bar, 52 on a 14" bar, 55 on a 16" bar, 56 on a 16" bar, 62 on a 18" bar. The bar length is usually printed near the mount.

Can I use a chain with the same length but different pitch?

No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.

Related Husqvarna saws

Every Husqvarna model