Makita EA3500SR chain size
The chain for your Makita EA3500SR
Which bar is on your saw?
Which chain is on it now?
Which chain is on it now?
- Pitch
- 3/8"
- Gauge
- .043"
- Drive links
- 46
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 46
- Pitch
- 3/8"
- Gauge
- .043"
- Drive links
- 52
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 52
- Pitch
- 3/8"
- Gauge
- .050"
- Drive links
- 56
Buy this chain
AdAs an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Makita genuine part numbers
If you prefer the maker's own parts, these are the numbers to ask for at a dealer.
| Bar | Chain part no. | Bar part no. |
|---|---|---|
| 16" | E-00256 | E-00103 |
Check the chain on your saw
Find pitch and gauge from the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Makita EA3500SR take?
The Makita EA3500SR chain depends on the bar. 12" bar: 3/8", .043", 46 drive links; 12" bar: 3/8", .050", 46 drive links; 14" bar: 3/8", .043", 52 drive links; 14" bar: 3/8", .050", 52 drive links; 16" bar: 3/8", .050", 56 drive links.
How many drive links is a Makita EA3500SR chain?
It depends on the bar: 46 on a 12" bar, 46 on a 12" bar, 52 on a 14" bar, 52 on a 14" bar, 56 on a 16" bar. The bar length is usually printed near the mount.
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.