Makita UC3530 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

We don't have this saw's chain yet

We don't have the chart for the Makita UC3530 yet. You can still get it right with the old chain in hand: read the number stamped on a drive link, then count the links.

Check your chainChains by bar length

Makita genuine part numbers

If you prefer the maker's own parts, these are the numbers to ask for at a dealer.

Makita bar and chain part numbers
BarChain part no.Bar part no.
16"196208-3412-040-661, 442-040-661

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Makita UC3530 take?

Read the number stamped on a drive link for pitch and gauge, then count the drive links: those three numbers are the chain.

Related Makita saws

Every Makita model