Troy-Bilt TBPS-8 DL chain size
The chain for your Troy-Bilt TBPS-8 DL
- Pitch
- 3/8" LP
- Gauge
- .043"
- Drive links
- 34
The Troy-Bilt TBPS-8 DL with an 8" bar takes 3/8" LP pitch, .043" gauge chain with 34 drive links (Oregon R34).
Bar mount A041
Buy this chain
Ad
As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.
Check pitch, gauge and drive links on the listing before you order. How this works
Check the chain on your saw
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
| Stamp | Pitch | Gauge |
|---|---|---|
| 11 | 3/4" | .122" |
| 16 | .404" | .063" |
| 18 | .404" | .080" |
| 20 | .325" | .050" |
| 21 | .325" | .058" |
| 22 | .325" | .063" |
| 25 | 1/4" | .050" |
| 26 | .404" | .058" |
| 27 | .404" | .063" |
| 33 | .325" | .050" |
| 34 | .325" | .058" |
| 35 | .325" | .063" |
| 50 | .404" | .050" |
| 51 | .404" | .058" |
| 52 | .404" | .063" |
| 58 | .404" | .058" |
| 59 | .404" | .063" |
| 68 | .404" | .063" |
| 72 | 3/8" | .050" |
| 73 | 3/8" | .058" |
| 75 | 3/8" | .063" |
| 80 | .325" LP | .043" |
| 90 | 3/8" LP | .043" |
| 91 | 3/8" LP | .050" |
| 95 | .325" | .050" |
Questions people ask
What size chain does a Troy-Bilt TBPS-8 DL take?
The Troy-Bilt TBPS-8 DL with an 8" bar takes 3/8" LP pitch, .043" gauge chain with 34 drive links (Oregon R34).
What bar fits a Troy-Bilt TBPS-8 DL?
A bar with the A041 mount, in one of these lengths: 8".
Can I use a chain with the same length but different pitch?
No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.