Wen 2700 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your Wen 2700

Which bar is on your saw?

12" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
49
  • Oregon S49
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

14" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
53
  • Oregon S53
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

16" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
58
  • Oregon S58
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

Buy this chain

Ad

Oregon S49, 49 drive links

Amazon14" Semi Chisel Saw Chain for Oregon S49 ChainsawsSee it on AmazoneBayOregon AdvCut S49 Chainsaw Chain 14in 3/8 Low Profile .050 49DL McCulloch PoulanSee it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the Wen 2700
Chain for each bar length
BarPitchGaugeDrive linksChain
12"3/8" LP.050"49S49
14"3/8" LP.050"53S53
16"3/8" LP.050"58S58

The Wen 2700 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 49, 14" bar 53, 16" bar 58.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Wen 2700 take?

The Wen 2700 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 12" bar 49, 14" bar 53, 16" bar 58.

How many drive links is a Wen 2700 chain?

It depends on the bar: 49 on a 12" bar, 53 on a 14" bar, 58 on a 16" bar. The bar length is usually printed near the mount.

Can I use a chain with the same length but different pitch?

No. Pitch and gauge have to match the bar and sprocket, and the drive link count has to match the bar. A chain that is off on any of the three will not fit or run safely.

Other saws with the same chain

All saws that take S49 All saws that take S53 All saws that take S58

Related Wen saws

Every Wen model