Worx WG3041 chain size

Chainsaw drawing: the bar and chain are the parts this page is about

The chain for your Worx WG3041

Which bar is on your saw?

14" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
53
  • Oregon S53
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

16" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
57
  • Oregon S57
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

18" bar

Pitch
3/8" LP
Gauge
.050"
Drive links
63
  • Oregon S63
  • Same as Stihl 63PM3, Husqvarna H36
  • File 5/32"

Bar mount A041

Buy this chain

Ad

Oregon S53, 53 drive links

AmazonNo exact listing found. Search for Oregon S53 chainsaw chainSearch on AmazoneBayNOS Oregon S53 14" Chainsaw Cutting Chain 713613 XtraGUARD 53 Links Made in USA See it on eBay

As an Amazon Associate we earn from qualifying purchases. As an eBay Partner Network affiliate we may earn a commission from qualifying sales on eBay.

Check pitch, gauge and drive links on the listing before you order. How this works

All bar lengths for the Worx WG3041
Chain for each bar length
BarPitchGaugeDrive linksChain
14"3/8" LP.050"53S53
16"3/8" LP.050"57S57
18"3/8" LP.050"63S63

The Worx WG3041 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 14" bar 53, 16" bar 57, 18" bar 63.

Check the chain on your saw

Drawing: pitch is the distance between three rivets divided by two
Pitch Measure across three rivets and divide by two. Common pitches are 1/4", .325", 3/8" and .404".
Drawing: gauge is the thickness of the drive link in the bar groove
Gauge The thickness of the drive link that rides in the bar groove: .043", .050", .058" or .063".
Drawing: count the drive links, the tabs under the chain
Drive links Lay the chain flat and count the tabs underneath. Mark one with a paint pen so you know where you started.
Find pitch and gauge from the number on a drive link
Type the number on a drive link
See all stamp numbers
Drive link stamp number to pitch and gauge
StampPitchGauge
113/4".122"
16.404".063"
18.404".080"
20.325".050"
21.325".058"
22.325".063"
251/4".050"
26.404".058"
27.404".063"
33.325".050"
34.325".058"
35.325".063"
50.404".050"
51.404".058"
52.404".063"
58.404".058"
59.404".063"
68.404".063"
723/8".050"
733/8".058"
753/8".063"
80.325" LP.043"
903/8" LP.043"
913/8" LP.050"
95.325".050"

Questions people ask

What size chain does a Worx WG3041 take?

The Worx WG3041 takes 3/8" LP pitch, .050" gauge chain. Drive links by bar length: 14" bar 53, 16" bar 57, 18" bar 63.

How many drive links is a Worx WG3041 chain?

It depends on the bar: 53 on a 14" bar, 57 on a 16" bar, 63 on a 18" bar. The bar length is usually printed near the mount.

What bar fits a Worx WG3041?

A bar with the A041 mount, in one of these lengths: 14", 16", 18".

Other saws with the same chain

All saws that take S53 All saws that take S57 All saws that take S63

Related Worx saws

Every Worx model